webercol plus is a ready mix cement-based high performance polymer “latex” modified tile adhesive for internal and external use. col plus has a strong bonding effect, used for adhering large tiles, or in cases of permanent exposure to high degrees of humidity. It can be used in a damp environment, and is water resistant. col plus is non-sagging and classified "T" (slip resistant) according to EN 12004 for tile adhesives (UAE, Jordan, Syria, Lebanon, KSA, Oman).The addition of the new Low Dust feature allows a dust reduction by 90% during pouring and mixing of the product!*

The Low Dust effect will lead to:
• Cleaner working sites
• Easier and quicker renovation

INSTRUCTIONS FOR USE

SURFACE PREPARATION:

Surface must be clean and free from greasy matters or dust. Substrate should have been sufficiently cured in a way that any shrinkage has already occurred. Moisten slightly the substrate if it is dry at the time of application, never moisten the tiles.

PRODUCT PREPARATION:

Mix col plus in the proportion of 5 to 6 liters (4 to 4.8 L. for 20 kg) of clean cool water per 25 kg bag. An electric mixer with low rotation speed (< 300 rpm) can be used. Mix until a uniform lump free paste is obtained. Let the paste rest for a few minutes before starting the application.

PRODUCT APPLICATION:

Apply col plus evenly on the substrate. Use a notched trowel to have a uniform thickness of 2 to 3 mm minimum. Apply the tiles on the substrate and press them firmly, while making sure that the paste does not slip from the tile sides. col plus can also be applied on the back of tiles to ensure full adhesion with all the surface. In case exceptional performance is required, each bag of 25 kg col plus should be mixed with 1 liter ad 225 MB (styrene butadiene latex bonding agent) + 4.75 liters clean water.

STORAGE:

12 months after manufacturing date in original and non-open packaging, under cover, in dry condition, away from humidity, protected from extreme temperatures and direct sunlight.

SAFETY PRECAUTIONS:

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable that the application be done in a ventilated area, and to wear protective gear for hands, eyes and respiratory system and to avoid breathing of the dust. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thouroughly with clean water. If swallowed, do not induce vomitting, in both cases seek medical attention. The product is non-flammable