Terraco Maxi Tile Paste

Maxi Tile Paste is a ready-mixed, economical, high quality, all-purpose acrylic adhesive for tiles and clinkers.

Maxi Tile Paste is an economical, high quality, all-purpose acrylic adhesive for tiles and clinkers. It is ideally suited for use on exterior and interior surfaces of concrete, plasterboard, etc.

Maxi Tile Paste is ready-mixed and easy to apply by notched trowel.

Application:

Ensure that the surface is level and all dust, dirt and foreign matter are brushed and scraped away. Also ensure the surface is solid and free from salts, oil, grease and ridges. All cracks, chips, voids and damages should be repaired with an appropriate filler. Terraco Acrylic Filler or Terramix (for cementitious materials) is recommended. Absorbent or porous surface and plasterboards should be primed with TERRACO Penetrating Primer.

Apply Maxi Tilepaste in a layer approximately 3mm thick to the surface with the smooth side of a notched trowel. Pull the notched edge of the trowel through the applied layer. Push and twist the tiles into place so that complete adhesion is established. Fix tiles before the adhesive layer is surface dry. Plan work accordingly. Do not allow a “skin” to form on the surface of applied adhesive. Clean tools and equipment with water after use.

Remove excess adhesive from the face of the tile with a wet sponge before the adhesive dries.

=> Easy to Apply Paste for Terracotta Tiles
=> High Adhesion and Water Resistance
=> Suitable for Interior and Exterior Use