PU SEMIGLOSS # 1070 WHITE is a polyurethane material based on saturated polyester resin. It is formulated to give a maximum whiteness, thanks for the high quality of raw material. Furthermore, PU SEMIGLOSS # 1070 WHITE is resistant to both extreme weather with no – yellowing effect, resistant to abrasion and provides a very smooth finish

Major Uses:

Highly recommended to all woodworks, furniture such as beds, cabinets, chairs, sofas, doors and frames, turned pieces and the likes.

Method of Application:

• The surface to be top coated should be primed with either polyurethane primer or polyester primer white.
• It should be cleaned, well – sanded and free from dust, oil, water and other contaminants to ensure long lasting effect.
• For cracks, crates and nail holes, it is advisable to fill with either Putty filler, Putty white # 2185 or Polyester putty.
• Apply 1 – 2 coats of PU SEMIGLOSS # 1070 WHITE horizontally and vertically.
• One coat may be sufficient for ordinary finish however; one additional coat can be applied wet on wet if necessary. Light sanding with 400 ~ 600 grit sand paper is recommended before subsequent coats, when recoating time exceeds 3 hrs.

Storage:

Shelf life 12 months minimum if stored below 250C.

Cleaning of Tools:

All tools should be cleaned with Wash Thinner or PU Thinner # 105 as soon as possible.

Physiological Hazards:

PU SEMIGLOSS # 1070 WHITE and Catalyst # 013 do not contain dangerous solvents; nevertheless, good ventilation in working rooms is recommended a well as the use of safety tools and equipment. PU SEMIGLOSS # 1070 WHITE and Catalyst # 013, in its liquid state is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water.