PU SEMIGLOSS # 2155 BLACK is a pigmented polyurethane material based on saturated polyester resin. It is formulated to give a maximum covering property, thanks for the high quality of raw material. Furthermore, PU SEMIGLOSS # 2155 BLACK is resistant to both extreme weather with no – yellowing effect, resistant to abrasion and provides a very smooth finish. PU SEMIGLOSS # 2155 BLACK meets the requirements of 2010 Dubai Green Building Regulations and Specifications (GRBS)

Major Uses:

Highly recommended to all woodworks, furniture such as beds, cabinets, chairs, sofas, doors and frames, turned pieces and the likes.

Method of Application:

• The surface to be top coated should be primed with either polyurethane primer or polyester primer white.
• It should be cleaned, well – sanded and free from dust, oil, water and other contaminants to ensure long lasting effect.
• To obtain a smooth finish, ensure that the basecoat is sufficient to avoid uneven and irregular surface.
• For cracks, crates and nail holes, it is advisable to fill with either Putty filler, Putty white # 2185 or Polyester putty.
• Apply 1 – 2 coats of PU SEMIGLOSS # 2155 BLACK horizontally and vertically.

Recoating:

One coat may be sufficient for ordinary finish. However, additional coat can be applied wet on wet if necessary. Light sanding with 400~600 grit sand paper is recommended before subsequent coats when recoating time exceeds 3 hours.

Storage:

Shelf life 12 months minimum if stored below 25 Degree Celsius

Cleaning of Tools:

All tools should be cleaned with Wash Thinner or PU Thinner # 105 as soon as possible.

Physiological Hazards:

PU SEMIGLOSS # 2155 BLACK and Catalyst # 013 do not contain dangerous solvents; nevertheless, good ventilation in working rooms is recommended a well as the use of safety tools and equipment. PU SEMIGLOSS # 2155 BLACK and Catalyst # 013 in its liquid state is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice