PU PRIMER WHITE # 153 is a polyurethane pigmented undercoat based on saturated polyfunctional polyesters and selected pigments. A two-component material with outstanding characteristics, filling well pores of all types of woods. It has good sanding qualities, which reduces the number of coats required.

Major Uses:

PU PRIMER WHITE # 153 is primarily used for all types of woods furniture sets, turned pieces.

Method of Application:

• To the surface well prepared, apply 1 – 2 coats of PU PRIMER WHITE # 153 with Catalyst # 004, vertically and horizontally.
• Fill all cracks, deep holes and joints with polyester putty.
• Sand the surface with medium – grade sand paper.
• Apply 1 – 2 coats of PU PRIMER WHITE # 153 prior to the final sanding and top coating.
• In case PU PRIMER WHITE # 153 is used in curtain coating, the viscosity of the lacquer should be carefully controlled and monitored for continuity of the finish.
• Recoating must be done within 3 minutes to 3 hours maximum. Medium sanding with 240-320 grit sandpaper is recommended prior to any subsequent coatings

Storage:

Shelf life 12 months minimum if stored below 250C.

Cleaning of Tools:

All tools should be cleaned with Wash Thinner or PU Thinner # 105.

Physiological Hazards:

PU PRIMER WHITE # 153 and Catalyst # 004 do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU PRIMER WHITE # 153 is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advise.