PU GLOSS # 2140 WHITE is a polyurethane material based on polyfunctional saturated polyester resin. It is formulated to give a maximum glossiness and whiteness, thanks for the high quality of raw material. Furthermore, PU GLOSS # 2140 WHITE is resistant to both extreme weather with no – yellowing effect, resistant to abrasion and provides a very smooth finish.

Major Uses:

Highly recommended to all woodworks, furniture such as beds, cabinets, chairs, sofas, doors and frames, turned pieces and the likes.

Method of Application:

• The surface to be top coated should be primed with either Polyurethane Primer or Polyester Primer White.
• It should be cleaned, well – sanded and free from dust, oil, water and other contaminants to ensure long lasting effect.
• Apply 1 – 2 coats of PU GLOSS # 2140 WHITE, horizontally and vertically.
• In any case that recoating is required, 1- 2 coats may be sufficient for ordinary finish; however, additional coats can be applied wet on wet. If necessary. Light
  sanding with 600-800 grit sandpaper is recommended before subsequent coats when the material has been dried for more than 24 hours.

Storage:

Shelf life 12 months minimum if stored below 25 Degree Celsius. 

Cleaning of Tools:

All tools should be cleaned with Wash Thinner or PU Thinner # 105 as soon as possible

Physiological Hazards:

PU GLOSS # 2140 WHITE and Catalyst # 016 do not contain dangerous solvents; nevertheless, good ventilation in working rooms is recommended a well as the use of safety tools and equipment. PU GLOSS # 2140 WHITE and Catalyst # 016, in its liquid state is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.