Henkel Polybit Polyprime SB Solvent Based Bitumen Primer

Polybit Polyprime SB is a quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings. Polyprime SB is low in viscosity, which allows it to penetrate into the concrete pores and improve the adhesion between the membrane and the concrete surface. In addition to that, the primer also acts as a binder for the dust particles which gets accumulated on the concrete surface even after cleaning.

• Improves the adhesion of bitumen based sheet membranes and coatings
• Cold applied, does not require heating
• Binder for dust particles

Application

Mix the contents of the pail or drum for a few minutes to remove any sediments. apply the primer @4-6 m²/L to a clean smooth and dry surface by brush/roller. Allow the primer to dry prior to the application of the membrane.For highly porous surfaces application of a second coat is recommended.

STORAGE & SHELF LIFE

The pails and drums must be stored in a covered, dry and shaded area, away from direct sunlight, UV and other sources of heat and protected from extreme temperatures.
The shelf life of the product is up to 12 months if stored as per the recommendations. Excessive exposure to sunlight and UV will result in the deterioration of the quality of the product and reduce its shelf life.